Regal P+
Hot Tub • 23 Jets • 7 Seats • Plug & Play
About the Regal P+
Regal P+ is the Element model with the most seats: seven, all upright, in a 78-inch square shell. Choose it over Royale P+ when you’d rather have another seat than a full lounge.
The 23-jet system uses one pump and a 120-volt, 15-amp electrical configuration. Insulation, LED lighting and a fitted cover are included; water-care upgrades are optional. The specified dedicated supply and a suitable base are still required.
Why People Choose the Regal P+
- 👥Have seats for the group with a plug-in setup: seven upright positions keep the layout open for conversation.
- 🏡Keep the same 78-inch square footprint as Regal and Regal X, rather than choosing a smaller seating plan to get plug-and-play.
- 🔌Start with a 120-volt configuration instead of a hardwired model; the specified dedicated supply is still required.
- 🌙Enjoy included interior and exterior lighting for evenings outside, plus insulation and a cover; water-care upgrades remain optional.
Core Features
Fitted cover included
The included foam-core cover helps retain heat and keeps debris out when the spa is not in use.
Balboa controls
Adjust spa settings from the Balboa control panel. See the specifications for the controller fitted to this model.
Interior and exterior LED lighting
LED lighting is fitted inside and outside the spa for evening use.
23 jets, one pump
Regal P+ has 7 seats in an all-upright layout. The 23-jet system uses one jet pump.
Videos
BP control-panel navigation — Viking Spas Service. Panel appearance can vary by configuration.
Supplies & Ongoing Care
Filters, water care, and maintenance items designed to support this model.
Planning and Ownership Guides
Use these next steps for installation planning, ongoing care, and side-by-side model decisions.